TroubleshootingDiversified Cryogenics is committed to helping you solve your brake rotor problems.
Click on the images to the right for detailed information on the rotor symptoms.
|
Excessive Tightening of the Positioning BoltTrouble Shooting Brake Rotor ProblemsDescription of the defect: The carrier mounting surface can easily distort when the disc positioning bolt is tightened too much. This excessive tightening can cause the mounting surface to break as can be seen in the photo. Consequences: Run outing cannot be kept within an acceptable tolerance. Heavy vibrations occur during the very first kilometers following installation. Advice: Tightening bolts only intended to ensure that discs are positioned correctly. Do no tighten them excessively. <<Back Excessive Tightening of the Positioning Bolt 
Photos Reproduced From: The Brake Disk Manual by Brembo, author Jean-Paul Pompon and coordinating editor Marc Aguettaz |
